Load Planning / Setup / Trucks [LPN001]
Load Planning / Setup / Drivers [LPN002]
The next step in configuring the Load Planning module is to set up the trucks and driver details within DATASCOPE PREMIUM WMS.
| Info |
|---|
If you don’t like reading, you can watch the video. |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
No Video https://vimeo.com/941846549/66fbba4a7e 002_premium_ACTIVATION_AND_CONFIGURATION_product_userguide_UG - v0.1.pdf |
Try it!
Set up Trucks.
The Trucks that must be set up refer to your transport vehicles.
From the Main Menu, browse to Load Planning / Setup / Trucks
The Trucks screen will open.
Add your first truck by clicking on the field to the right of the start under VRN (Vehicle Registration Number). You can specify unique VRNs, including the maximum mass, volume, GVM, and capacity.
| Info |
|---|
Note: If you don’t have the maximum mass, volume, GVM, and capacity, you can leave it blank. |
Select Save to save your new Truck.
Next, the Drivers can be set up.
Set up Drivers.
From the Main Menu, browse to Load Planning / Setup / Drivers
The Drivers screen will open.
Add your first driver by clicking on the field to the right of the start under Name and enter the Name and Surname.
Assign a Designation to each driver by selecting the Designation drop-down.
Select the driver's Default VRN (Vehicle Registration Number) by selecting the Default VRN drop-down.
| Info |
|---|
Note: The trucks must be set up before the drivers are added. |
Select Save to save the changes.
A pop-up will appear stating the information has been saved.
The Delivery Route assigned to a customer will be visible on the Sales Order Release screen - Viewing Orders per Route