Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

<menu path> <link to F1 content>

<intro text>

Work in Progress / WIP Release / Job Stock Code Replace [WIP010]

This DATASCOPE PREMIUM WMS module quickly replaces an existing component on a single or multiple SYSPRO Jobs with a suitable alternative component. This is typically used when a factory component can easily be replaced without compromising the end result of the Job. Replacing a component might be required due to QTY or quality problems that prevent the use of the original component.

Some rules, however, do apply to follow this process:

  • This module does not allow editing QTYs; only the stock code can be changed. It also does not affect the parent component's Bill of Material (BOM) but only the individual stock code allocations on the Job.

  • The module only displays and allows edits to Unconfirmed SYSPRO Jobs.

  • The standard SYSPRO validations apply; therefore, stock codes cannot be replaced on Jobs if the stock code line is complete or if the warehouse record of the original line does not exist against the new stock code replacement.

Info

If you don’t like reading, you can watch the video.

Panel
panelIconId1f3a5
panelIcon:movie_camera:
panelIconText🎥
bgColor#DEEBFF

<link to YouTube video>

<link to PDF doc on my OneDrive>

Try it!

<content>

Try it!

How to replace a stock code with a suitable alternative stock code

Info

Note: This module can only be done on the PC screen. No HTML5 mobile screen is available.

  • From the Main Menu, browse to Work in Progress / WIP Release / Job Stock Code Replace.

image-20240710-085650.pngImage Added
  • The Job Stock Code Replace screen will open.

  • To replace a stock code for all eligible unconfirmed SYSPRO Jobs, start by entering the existing stock code in the Current Stock Code field.

image-20240710-085658.pngImage Added
  • If you tab off the field, the Description for that stock code will load automatically.

image-20240710-085707.pngImage Added
  • Enter the replacement stock code in the Replacement Stock Code field.

  • Select the Query Jobs button. This will load all the unconfirmed SYSPRO Jobs in the data grid with the Current Stock Code that must be replaced.

image-20240710-085714.pngImage Added
  • If you scroll to the right-hand side of the screen, you can deselect any Job whose stock code must not be replaced or select the Select All or Deselect All buttons.

image-20240710-085722.pngImage Added
  • After you have selected the correct Jobs whose stock codes must be replaced, select the Start Processing button.

  • Once processing is completed, the Job will disappear from the data grid, and the current stock code will be replaced with the replacement stock code.

Review the Job in SYSPRO

  • Under SYSPRO Programs, browse to Work in Progress / Job Query

image-20240710-085730.pngImage Added
  • The Job Query screen will open.

image-20240710-085736.pngImage Added
  • Enter a Job number in the Job field.

image-20240710-085746.pngImage Added
  • Notice under Material Allocations that the replacement stock code (A111) has been added to the Job with the same QTY and warehouse as the current stock code. The current stock code (A100) will not be deleted from the job, but the required QTY will be updated to zero.

Info

Note: If the replacement stock code does not exist in the warehouse of the current stock code, an error message will be displayed in DATASCOPE PREMIUM WMS, and you will be required to add the warehouse record to the replacement stock code in SYSPRO before proceeding.

 Follow this process to quickly and effectively replace an existing stock code with an equivalent component on your unconfirmed SYSPRO Jobs.