Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
  • tblPallet

  • tblPalletAction

    This Mass Check module can be used to mass-check products after processing the initial receipt in DATASCOPE WMS and SYSPRO. >> where will this be processed? I presume through the normal Receipt Purchase Order moduel

    All items flagged as inspection required in SYSPRO are processed through the normal PO receipt or LCT receipt screen. When the post takes place into SYSPRO, WMS immediately receipts the stock into SYSPRO for inspection and then accepts and passes it. However, WMS automatically places the tracking ID on HOLD. 

    The mass check will activate pallets if the pallet mass is within a tolerance of the total theoretical mass calculated. This is particularly important when receiving full pallets of 1 stock code from a supplier and not unpacking the pallet but weighing to validate that all the stock is there.

    • Enter the TrackID (pallet number) in the TrackID field or use the lookup icon to locate it.

    • Enter the TrackID Tare

    • Enter the Packaging 1 Tare and Packaging 2 Tare, if required.

    • Select the Fetch Mass button, to select the Mass from the scale. >> how / where is this configured

    • A pop-up will appear if the tolerance is exceeded. The user has the option to override this.

    • Select Post

    • This will activate the pallets

    • A Mass check label can be printed.

    • Any pallet that fails we need to be negative receipted in SYSPRO, as the inventory has already been received into SYSPRO. The pallet in DATASCOPE can be manually inactivated in this scenario

    Page Tree Search
    rootPageF1 help

    SPECIAL FEATURES

    • Tolerance is customizable based on the warehouse setting. >> where is this set

    • Mass check label printing is available.

    TECHNICAL

    • TOLERANCE OVER - The allowed upper tolerance level >> under which system name

    • TOLERANCE UNDER - The lower tolerance level >> under which system name

    • PRINT LABEL - Select this to print a new label with the new mass. >> where is this print label option

    • CHECK LABEL - ??

    SYSPRO REQUIREMENTS & Business objects used

    •  

    REFERENCE

    REC030

    Inbound Mass Check

    FUNCTIONALITY OVERVIEW 

    This mass check can be used to mass check product after the initial receipt has been processed in WMS/SYSPRO.
    All items flagged as inspection required in SYSPRO are processed through the normal PO receipt or LCT receipt screen. When the post takes place into SYSPRO, WMS immediately receipts the stock into SYSPRO into inspection and then accepts and passes it. However, WMS automatically places the tracking ID on HOLD. 

    The mass check will activate pallets, if the pallet mass is within tolerance of the total theoretical mass calculated. This is particularly important when receiving full pallets of 1 stock code from a supplier and not unpacking the pallet but weighing to validate that all the stock is there.

    STANDARD PROCESS
    The process is as follows:

    • Enter/scan pallet number

    • Enter pallet tare

    • Enter additional packaging tare if required

    • Fetch mass on the scale attached

    • A pop up will appear if tolerance is exceeded and the user can override

    • Press post to allow pallets to become ACTIVE

    • Any pallet that fails we need to be negative receipted in SYSPRO, as the inventory has already been received into SYSPRO. The pallet in DATASCOPE can be manually inactivated in this scenario

    SPECIAL FEATURES

    • Tolerance is customizable based on warehouse setting

    • Mass check label printing available

    TECHNICAL

    • Relevant Settings

    TOLERANCE OVER - The allowed upper tolerance level
    TOLERANCE UNDER - The lower tolerance level
    PRINT LABEL - Select this to automatically print a new label with et new mass.
    CHECK LABEL - 
     
    SYSPRO Requirements & Business objects used

    • n/a

    DATASCOPE Table updates

    • If using the Fetch Mass option the scale setup must be done first in order to weigh the stock.

    TECHNICAL

    • A Tolerance over and Tolerance under can be set per warehouse. This specifies the percentages mass tolerance allowed OVER or UNDER the variance for the warehouse. From the Ribbon bar, select Settings / Warehouse Settings. Select the required Warehouse from the Warehouse drop-down and locate RECEIVING in the System Name drop-down. Update the SettingValue for MASSCHECK_TOLERANCE_OVER and MASSCHECK_TOLERANCE_UNDER to required tolerance percentage mass

    • In order to print the Mass check label the following settings must be configured correctly. From the Ribbon bar, select Settings / Warehouse Settings. Select the required Warehouse from the Warehouse drop-down and locate MASS_CHECKOUT in the System Name drop-down. Update the SettingValue for MASSCHECK_PRINT_LABEL to Y(es) and ensure the correct template are linked

    • Contact your local DSP to confirm if the correct template are linked.

    SYSPRO REQUIREMENTS & Business objects used

    •  None

    REFERENCE

    REC030