Job Return (pc-based)

Owned by DATASCOPE WMS, created
Last updated: Jun 29, 2023
3 min read

Work in Progress / Job Return / Job Return - Job Return [WIP040]

Job returns are used when you want to return components, which have already been issued to a job, back into inventory again. This can sometimes happen when stock has been over-issued to a job or not used during the manufacturing process and must then be returned into good usable inventory for another job.

Job Returns are mainly done on the scanner-based screen; however, a pc-based version is also available.

If you don’t like reading, you can watch the video.

Fast Track - Job Returns

fasttrack_JOB_RETURN_Training_Job_picking_QG - v0.3.pdf

Try it!

  • On the Main Menu browse to Work in Progress / Job Return / Job Returns

Locate Job Returns on the Main Menu
Pc-based Job Return screen

  • In the Job Number field, you can enter or use the lookup icon to locate the job number

  • The Stock Code and/or Lot number, which has been issued to the Job, will display on the screen, or if more than one, then you can select from the drop-down

  • The Quantity Issued will be displayed automatically

  • The Quantity to Return must be entered

  • Same as the scanner-based screen, the To TrackID field has two functions

    • If you want to return the stock code to an existing TrackID, you must scan the TrackID, which will populate the To TrackID field

    • If you want to return the stock code to a new TrackID, you must leave this field blank. The system will generate a new TrackID in the Default Bin displayed on the screen

  • Select Post. This will transact the return in both SYSPRO and DATASCPOPE WMS and print a TrackID if required

  • When printing to a physical printer, you must ensure that the System Settings is configured correctly

  • The JOBRETURNS setting under Settings / Printers on the Ribbon Bar must point to the physical printer. For more information, refer to Configure Printers