Warehouse Setup / Inventory On-Hold Maintenance / Inventory On-Hold Control (Warehouse Setup) [OBS019]

Once the On Hold reason codes have been configured, the Inventory On-Hold Control screen will perform the On and Off Hold transactions. This screen has several filters on the left-hand side to filter and find specific TrackIDs.

If you don’t like reading, you can watch the video.

DATASCOPE Premium - Inventory On Hold Module

001_premium_INVENTORY_ON_HOLD_product_userguide_UG - v0.1.pdf

Try it!

From the Main Menu, browse to Warehouse Setup / Inventory On-Hold Maintenance / Inventory On-Hold Control.

Locate the Inventory On-hold Control screen.

The Inventory On-Hold Control screen will open.

Inventory On-Hold Control screen.

Notice the various filter options on the left-hand side. More than one filter option can be used at the same time.
Let us filter by stock code. Enter the stock code number in the Stock Code filter field.

Select Load to Grid at the bottom of the filter screen. This will load the applicable records to the data grid.

The TrackIDs can be sorted using the standard data grid controls. For example, sort the Bin column to put all the Receiving Bin stock On Hold.

Select the affected TrackID by selecting the checkbox in the Select column.

Select the On Hold Reason code from the New On-Hold Reason drop-down at the top of the screen.

Select the Update button in the top right-hand corner.

This will put the selected TrackIDs in an ONHOLD status, and the reason code chosen will be added.
A pop-up message will appear stating the pallets have been put On Hold.
This can then be viewed in the TrackID History report. From the Main Menu, browse to KPI Dashboard & Reporting / Standard Reports / TrackID History.
Search for the applicable TrackID and note the ActionName and Comment.