Pick to TrackID
- DATASCOPE WMS
The Sales Pick to TrackID process still picks to a TrackID, but the TrackID has a different format and the Operator will pick and pack the stock at the same time. The format of the Picking TrackID will be Pickslip+WH+Box. (The Box will refer to a Box number)
Critical for this picking strategy is deactivating a warehouse setting. On the Ribbon Bar, browse to Settings / Warehouse Settings. Select the applicable Warehouse (typically, it would be the warehouse you are signed into) and locate the DISPATCH setting name. Here, you can update the PICKING_ALLOW_PICK_TO_PICKINGSLIP settings to N(o).
The setting change is required as the user will pack the box as they pick the pick slip. The advantage is that the picker can decide how to pack the box, and the warehouse does not require a packing station. The process does allow for a box check or final mass check, or, alternatively, it can be moved to a Shipping TrackID - for more information, please take a look at the shipping module.
If you don’t like reading, you can watch the video.
Try it!
Labeling configuration are required to be set prior to picking
When following this picking strategy the operator can choose from two labeling variations:
Print the Picking TrackID before picking (the Print Tab must be activated)
Print the Picking TrackID during picking
For more information on the setting configurations, refer to Labeling required for Pick to TrackID
Assigning the pick to an Operator
Assigning the pick to an Operator can only be done on the scanner.
Assigning TrackID/Box Pick to an Operator
Start picking the pick slips using the Sales Pick to TrackID HTML5 screen
The picking process will differ depending on the labeling variation chosen.
If printing Picking TrackID before picking
To follow this picking and labeling approach, refer to Start picking if printing Picking TrackID before picking (pick to label)
Print the Picking TrackID during picking
There are three different methods that can be followed:
Print the label before starting to pick (Prompt for labels on assign)
To follow this picking and labeling approach, refer to Start picking if printing Picking TrackIDs during picking (box picking)
Print the label after a pick slip has been picked and you want to seal the box (Print labels on Next Box)
To follow this picking and labeling approach, refer to Start picking if printing Picking TrackIDs during picking (box picking)
Print a Packet label after picking and when the pick is confirmed (Prompt for the label on Confirm)
To follow this picking and labeling approach, refer to Start picking if printing Picking TrackIDs during picking (box picking)
Review the data
All pick slip data is visible on the Pick Slip Review screen. This is the main management front-end from which warehouses review picks running within the warehouse. The overview here is useful to watch the flow through the warehouse, identify bottlenecks and apply pressure where required.
If you right-click on the pick slip and select View TrackID you will see that the Pick slip(s) has moved to the Picking TrackID and Bin.
