Create Delivery Routes in SYSPRO
- DATASCOPE WMS
SYSPRO.
After the Load Planning module has been activated in SYSPRO and DATASCOPE PREMIUM WMS, the Delivery Routes must be created in SYSPRO per customer.
If you don’t like reading, you can watch the video.
Try it!
Open SYSPRO.
From the SYSPRO Program list, browse to Accounts Receivable / Setup / Customers.
From the Customer lookup field, you can locate the first customer.
Select the customer’s name from the Customer for the Branch: All screen to configure the customer’s delivery route.
Within the General Details pane, you can set up the Delivery route and the Delivery route sequence.
The only data required for the DATASCOPE PREMIUM WMS Load Planning module to work is the Delivery Route and sequence configured on this SYSPRO screen. The Volume, Mass, and Frequency are not required.
The Delivery route sequence can be configured for each customer and route. It refers to the sequence in which each customer will receive their delivery. For example, if you have five customers on the same delivery route, this sequence number will define which customer’s delivery gets offloaded first, second, third, etc.
These Delivery Routes and associated Sequence numbers automatically carry over into the DATASCOPE PREMIUM WMS Sales Orders created for each customer.
The next step is to create the Trucks and Drivers - Set up Trucks and Drivers