Printing the TrackIDs (for Returned stock)

Owned by DATASCOPE WMS, created
Last updated: May 07, 2024
3 min read

Warehouse Setup / TrackID Maintenance / TrackID Creation Advanced - TrackID Creation Advanced [WHS044]

After a Credit Note was processed within SYSPROs RMA module, the returned stock must be placed back into DATASCOPE WMS, and SYSPRO and DATASCOPE WMS must be balanced and new TrackIDs must be printed for the returned stock.

The TrackID Creation Advanced module within DATASCOPE WMS will be used for this. All stock codes in the SYSPRO RETURNS bin have now been allocated to TrackIDs.

Let us look at Printing these TrackIDs

If you don’t like reading, you can watch the video.

Fast Track - Credit Note Module

fasttrack_CUSTOMER_CREDIT_PROCESS_Training_CustomerReturns_QG - v0.1.pdf

Try it!

TrackID labels must have been created for the returned stock, and all receipt quantities be added to the TrackIDs. There are a couple of ways to create the TrackIDs and add the returned stock.

Once all the stock codes in the SYSPRO RETURNS bin have been allocated to TrackIDs you can start printing the TrackIDs. Review the right-hand side of the TrackID Creation Advanced screen - all TrackIDs ready to be printed will be visible.

All stock codes have been allocated - view TrackIDs in right-hand column of screen.

  • Select the Print TrackID(s) button at the bottom of the TrackID Creation Advanced screen.

Print TrackID button

  • Tracking ID Labels will print for all the TrackIDs in the TrackIDs field on the right-hand side of the screen, using the Label format (DATASCOPE_TRACKID_4X2.5) selected in the Label Format field at the top of the screen.

  • This process will put SYSPRO and DATASCOPE WMS back into balance in the RETURNS bin and these TrackIDs are now ready to be put away using the HTML5 scanners. For more information on Put Aways, refer to Put Away (HTML5)