Dimensions and Mass (HTML5-based)
- DATASCOPE WMS
Dimensions and mass are typically updated just before the pallets can be dispatched. This will happen while a pallet is physically being weighed and measured.
A user would enter this information per Shipping TrackID either on the PC screen or the HTML5 scanner.
Let us review how this is done on the HTML5 scanner screen.
If you don’t like reading, you can watch the video.
Try it!
When doing it with a scanner:
Locate the Shipping Dims and Mass icon on the scanner
You can also access the HTML5-based scanner screens form the PC
To open the HTML 5 scanner screen from the PC, go to the Main Menu at the top of your screen and select Launch HTML5. This will open the HTML 5 sub-menu.
Click on the Launch HTML 5 icon.
Your HTML 5 scanner screen will load.
You will notice that all the modules will be visible. Use the search icon to easily search for a module or browse through the screens to locate it.
Scan (or enter) the first Shipping TrackID
Enter the Dimensions and Mass for the first Shipping TrackID.
Select Post
You will proceed with all Shipping TrackIDs for that specific Waybill in the same manner.
If you refresh the Shipping TrackID tab on the Waybill/BOL Maintenance screen, you will notice that the Shipping Status has changed from IN_PACKING to ASSOCIATED and the dimensions and mass will be updated
Select Exit to close the screen
The next step will be to truckload the finalized Shipping TrackIDs into the delivery vehicle when the shipping agent arrives - Shipping Truckload
<previous Link>
<next link>