Import your License & Settings Import (3 of 4)

Owned by DATASCOPE WMS, created
Last updated: Aug 30, 2024
5 min read

None

In the following step you will need to import your License file and configure some Settings.

Step 3 of 4 - License and Settings Import

If you don’t like reading, you can watch the video.

FASTTRACK WMS - Docker Install

fasttrack_INSTALLATION_GUIDE_Installation_IG - v0.15.pdf

Try it!

  • Start by clicking on the Import button next to FASTTRACK WMS License file. This was provided to you during the sign-up process

  • Browse to your location where you stored the file

Browse to the License file to import

  • Select Open to import the file

  • Once the file is imported you will get a pop-up confirming that the License file is valid

  • Once your License file is imported successfully you can start by configuring some settings

  • Select the Configure button next to FASTTRACK WMS Configuration

  • The Configuration Tab has three sections you must complete.

  • You will start with the SQL Server and Network configurations

  • Once done, we will continue with the SYSPRO Integration

  • Lastly, we will focus on the SYSPRO Companies

 

  • Enter the required details to connect FASTTRACK WMS to the SYSPRO database.

SQL Server IP:

(Enter your IP address of the SQL Server where the SYSPRO database is hosted)

SQL Username:

(Enter the SQL Username to be used by WMS to connect to the SQL Server)

Note: it is advised to have a dedicated user for this purpose with admin privileges. The ‘sa’ user is not recommended.

SQL Password:

(Enter the password for the specified SQL username above)

  • Next, you need to configure the network information.

  • The container does not require a dedicated IP address or network, it is bound to the Host machine.

  • Enter the required details to configure the network for FASTTRACK WMS.

Host IP Address:

(This is the IP address of the machine the Docker image will be running from. The system will automatically display the IP address of that machine. Once the Docker images is running as a container, it will be accessed via this IP address. The ports for WMS, which is Port 80 (HTTP), 8081 (WebAPI), and 8888 (Cloud Print Service) will be exposed via this IP as well)

  • Once completed you can select Verify 

  • All fields will be marked green to confirm it has been verified successfully.

  • Select Next to continue to the next TAB – SYSPRO Integration

  • Enter the required details to configure the SYSPRO Integration.

SYSPRO IP:

(Enter the IP Address of the SYSPRO server. SYSPRO E.net will need to be configured and running on the server, using WebService or WCF)

Integration:

(Select appropriate Integration method)

Endpoint:

(Enter the web address endpoint for the WCF or WebServices depending on the integration option above. The SYSPRO defaults will automatically load. Please verify that it is correct)

Company ID:

(Enter one of your company ID/Letters. This is ONLY required to validate the SYSPRO Integration by performing an E.net login)

Company Password:

Enter the correct Company Password

Operator:

(Enter an Operator name. NOTE: This operator is also used as the initial WMS Operator and must be part of the SYSPRO ‘ADMIN’ group) For more information refer to the Set up your Users

Operator Password:

(Enter the Operator password for the above Operator name. This will be used for SYSPRO Integration validation as well as the initial WMS Operator)

  • If you do capture incorrect information the fields will be highlighted in red. (if you hover over them, you will also see the error message) This must first be rectified, and all fields must be green to Verify and continue.

  • Select Next to continue to the next TAB – SYSPRO Companies

  • Enter the required details to configure the SYSPRO Companies. Here we will setup two Companies, one for Test and one for Live

Company ID:

(Select your SYSPRO Company to link to FASTTRACK WMS. Typically, this is your Test or Live SYSPRO Companies)

Company Password:

(Enter appropriate password)

Database Name:

(Enter SYSPRO SQL Database name for company specified)

  • Select Add

  • You can Add a second and third company as well

  • Select Verify to verify the information.

  • Select Finish