This Mass Check module can be used to mass-check products after processing the initial receipt in DATASCOPE WMS and SYSPRO.
All items flagged as inspection required in SYSPRO are processed through the normal PO receipt or LCT receipt screen. When the post takes place into SYSPRO, WMS immediately receipts the stock into SYSPRO for inspection and then accepts and passes it. However, WMS automatically places the tracking ID on HOLD.
The mass check will activate pallets if the pallet mass is within a tolerance of the total theoretical mass calculated. This is particularly important when receiving full pallets of 1 stock code from a supplier and not unpacking the pallet but weighing to validate that all the stock is there.
Enter the TrackID (pallet number) in the TrackID field or use the lookup icon to locate it.
Enter the TrackID Tare
Enter the Packaging 1 Tare and Packaging 2 Tare, if required.
Select the Fetch Mass button, to select the Mass from the scale.
A pop-up will appear if the tolerance is exceeded. The user has the option to override this.
Select Post
This will activate the pallets
A Mass check label can be printed.
Any pallet that fails we need to be negative receipted in SYSPRO, as the inventory has already been received into SYSPRO. The pallet in DATASCOPE can be manually inactivated in this scenario
SPECIAL FEATURES
Tolerance is customizable based on the warehouse setting.
Mass check label printing is available.
If using the Fetch Mass option the scale setup must be done first in order to weigh the stock.
TECHNICAL
A Tolerance over and Tolerance under can be set per warehouse. This specifies the percentages mass tolerance allowed OVER or UNDER the variance for the warehouse. From the Ribbon bar, select Settings / Warehouse Settings. Select the required Warehouse from the Warehouse drop-down and locate RECEIVING in the System Name drop-down. Update the SettingValue for MASSCHECK_TOLERANCE_OVER and MASSCHECK_TOLERANCE_UNDER to required tolerance percentage mass
In order to print the Mass check label the following settings must be configured correctly. From the Ribbon bar, select Settings / Warehouse Settings. Select the required Warehouse from the Warehouse drop-down and locate MASS_CHECKOUT in the System Name drop-down. Update the SettingValue for MASSCHECK_PRINT_LABEL to Y(es) and ensure the correct template are linked
Contact your local DSP to confirm if the correct template are linked.
SYSPRO REQUIREMENTS & Business objects used
None
REFERENCE
REC030