Datascope WMS can manage stock codes with an inspection requirement. Datascope WMS will automatically receive inspectable sock codes into inspection from SYSPRO and immediately rerelease them out of inspection in SYSPRO, but it will be left as On Hold within Datascope WMS, so it cannot be picked or invoiced.

To release these pallets with an On Hold status, the Simple Quality Inspection module must be used.

For more information on the in-depth quality module, refer to the Quality Control module

• You can use the easy filtering options at the top of the screen to locate the pallets that need release.

• Select the Refresh icon to refresh your filtering options.

• The data grid will populate with the list of pallets with a Status of On Hold

• After inspection, you can tick the tick box under the Accept or Reject columns, indicating the pallet can be taken off hold (Accept) or must remain On Hold (Reject)

• The InspectionReference is a free format column that can be updated with any comments relating to the pallet. This will be posted back to SYSPRO once ready to Post.

• Select Post at the bottom right-hand corner of the screen.

• The software will process your changes.

If you don’t like reading, you can watch the video

SPECIAL FEATURES

TECHNICAL

SYSPRO REQUIREMENTS & Business objects used

REFERENCE

REC031