HTML5 - Pickface Replenishment
Warehouse supervisors will monitor the progress of replenishments using the PC-based Pickface Replenishment Review screen, and the replenishment staff will be tasked to pick the necessary stock by moving through the warehouse, selecting replenishment lines on the HTML5 scanner
There are two ways of picking replenishments on the HTML5 scanner:
Direct replenishment
Fetch and Put-Away
Let us review the Direct replenishment process.
| Info |
|---|
If you don’t like reading, you can watch the video. |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
fasttrack_PICKFACE_REPLENISHMENT_PROCESS_Training_Pickface_Replenishment_QG - v0.5.pdf |
Try it!
In this process, the user will only transact in the Fetch TAB on the Pickface Replenishment HTML 5 scanner-based module for the entire duration of the transaction.
The selected stock code requiring replenishment appears at the top of the screen as well as the pickface bin and Qty required.
| Info |
|---|
Note: The default FASTTRACK WMS installation does not suggest any supplying TrackID, so the user can scan any TrackID from any bin that contains the required stock code. |
By refreshing the Pickface Replenishment Review screen on the PC, the supervisor can see that the stock code replenishment has a status of IN PROGRESS. The user doing the replenishment is also visible on the screen
The Warehouse staff will scan the supplying pallet’s TrackID, or you can search for it via the Information Check screen
Once entered or scanned into the TrackID field you can TAB to the next field and the rest of the screen will populate automatically with the required information.
Enter the Destination TrackID in the To TrackID field and update the Qty to be moved to fulfil the requirement. The To TrackID would be the Pickface bin/TrackID, as the user is replenishing the stock from the bulk pallet directly into the pickface location.
| Info |
|---|
Note: The selected stock code requiring replenishment appears at the top of the screen as well as the pickface bin (To TrackID) and Qty required. |
Select Post
The stock will then move from the supplying pallet (bulk bin) into the pickface bin.
This will complete the requirement and clear the replenishment off the PC Pickface Replenishment Review screen and the scanner Items list
When stock must be moved between a bulk bin warehouse and a pickface bin warehouse the Fetch and Put-Away process will be used.
<previous Link>
<next link>