Stock Take and Cycle Counting / Reports / Cycle Count History [STK051]
The Cycle Count History Report This report records all posted counts (when posted on in the DATASCOPE PREMIUM WMS Cycle Count Approval screen) module for a specific date range that have taken place over time. The primary use for this report is to ensure . It ensures that regular cycle counts are being completed and that the their accuracy of the counts is within an acceptable measurementlimits.
| Info |
|---|
If you don’t like reading, you can watch the video. |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
https://youtuvimeo.be/XcN5sXzNT94com/998214449?share=copy fasttrack_CYCLE_COUNTING_Training_General_Transactions_QG - v0.5.pdf |
Try it!
Browse from From the Main Menu to menu, browse Stock Take and Cycle Counting / Reports / Cycle Count History
The Cycle Count History
Use the filters at the top to show only Accepted or Balanced or Rejected counts of everything
Report screen will open.
Enter the required date range in the From Date and To Date fields.
Other filter options like Warehouse, Bin, Stock Code, and TrackID are available.
To display only the counted bin, select the Show Counted Bin check box. This check box will be checked by default.
To display only uncounted bins, select the Show Non-Counted Bins check box.
To display only accepted counts (this is where variance was agreed and the stock QTYs changed), select the Accept check box.
To display only balanced counts (this is where there was no discrepancy between the physical count, the SYSPRO bin QTY, and the DATASCOPE PREMIUM WMS pallet QTY), select the Balance check box.
To display only the rejected counts (where there were variances but weren’t correct), select the Reject check box.
The last Cycle Count date and time can be seen in the Counted Date and Counted Time columns.
A reason code is visible in the Cycle Count Reason column.
The SYSPRO Cost Variance and SYSPRO Actual Variance is also visible.
The report can be exported to Excel by selecting the Export to Excel button.
Businesses use this report to demonstrate to their legal auditing firms that if they cycle count their entire warehouse within 5 to 6 months, they do not need to perform a full wall-to-wall stock take at the end of the year.
| Info |
|---|
Note: A Balanced count is when the captured quantity matches the DATASCOPE WMS theoretical quantity and matches the SYSPRO quantity for the stock code and/or Lot. |
You can rectify your Balance Report and align the two systems (SYSPRO and DATASCOPE WMS) to what is physically in the warehouse by using this Cycle Count module.