Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

DATASCOPE WMS extensively uses TrackIDs (also known as License Plates) throughout the system; therefore, all tracking units (inventory) are expected to be labeled with a TrackID.

These TrackIDs are placed on a pallet, barrel, or product roll. The TrackID is scanned during processing. The software will immediately know all the details and track the product’s history, including associated stock codes, lot quantity, current location, etc. This facilitates fast and accurate scanner-based transactions on the warehouse floor.

This module is used when a TrackID must be reprinted due to damage or loss. The user can find the TrackID data and do a reprint.

  • Various Label Formats are available from the Label Format drop-down. By default, only two label formats are available (DATASCOPE_TRACKID_4x2.5 and DATASCOPE_TRACKID_MULTISKU_4x6). These default labels can be edited or added to as required. All WMS labels are in a Crystal Report format so that you can make customized changes.

  • Enter a From TrackID or use the look-up icon to locate the desired TrackID.

If you use the look-up icon to locate a TrackID. The last created one will be visible at the top. This can be useful when there is a printer issue and you need to reprint some labels.

  • Enter a To TrackID or use the look-up icon to locate the desired TrackID again.

  • Select the Refresh icon to load the data grid.

  • Enter the number of copies required in the Number of Copies field in the bottom right-hand corner.

  • Select Print TrackID

  • The Printer pop-up will appear with the default printer listed.

  • Select Apply

  • The TrackID labels will print.

SPECIAL FEATURES

  • None

TECHNICAL

  • Different Label templates can be loaded under SYSTEM SETTINGS / PALLETLABELING

  • Lines with zero Quantity can be excluded from being printed if the System Setting ALLOW_ZERO_QTY_PRINTING, under PALLETLABELLING, is set to N(o)

  • Please ensure the System Settings are pointing to a physical label printer to print these labels. To view or update this, go to Settings / Printers. You can use the filter icon to locate the PALLETLABELING System Action.

    • Ensure the printer Name points to a physical printer

    For more information on configuring printers refer to Configure Printers

SYSPRO REQUIREMENTS & Business objects used

  • None

REFERENCE

LAB001

  • No labels