HTML
When ad hoc material is required to be issued out of inventory to an existing job an operator can manually issue the material out to the job. The job may or may not already have a Job pick slip.
If you don’t like reading, you can watch the video.
Try it!
On the Ribbon Bar, go to Launch HTML 5 / Launch HTML 5
The scanner-based screen will open. Search for Job Issue from the lookup icon to locate the Job Issue module
Once the Job Issue screen is open you must scan or type in the job number
Tab to the next field, TrackID
Scan or type in the supplying TrackID on which the material you wish to issue is residing
The Bin location, where the pallet is located, will display on the screen (Example: BULK-SA-1)
Note: If there are multiple stock codes and lots on the pallet, you will be required to select which stock code and/or lot you are issuing.
Enter the Qty you want to issue to the job
Note: In some instances, clients issue material using the alternative unit of measure configured for the stock code in SYSPRO. So, you can either use the Stocking or Alt (which is the Alternative Unit of measure) input fields to achieve the same results.
The Reason/Notation field can be left blank as this is only applicable/used with the DATASCOPE PREMIUM WMS (Reasons can be configured for manual issues. If this is configured it will post to the Notation field on the job in SYSPRO)
Select Post
The software will issue the stock code and/or lot number to the job you have scanned in both DATASCOPE WMS and SYSPRO and the supplying pallet will be reduced by the same Qty
<previous Link>
<next link>