Manual Job Issue (scanner-based)

Owned by DATASCOPE WMS, created
Last updated: Nov 14, 2023
2 min read

HTML / Job Issue [WIP083]

When ad hoc material is required to be issued out of inventory to an existing job an operator can manually issue the material out to the job. The job may or may not already have a Job pick slip.

If you don’t like reading, you can watch the video.

Fast Track - Manual Job Issue

fasttrack_HTML5_MANUAL_JOB_ISSUE_Training_Job_picking_QG - v0.2.pdf

Try it!

  • On the Ribbon Bar, go to Launch HTML 5 / Launch HTML 5

Launch HTML 5

  • The scanner-based screen will open. Search for Job Issue from the lookup icon to locate the Job Issue module

Job Issue module on the scanner-based screen

  • Once the Job Issue screen is open you must scan or type in the job number

  • Tab to the next field, TrackID

  • Scan or type in the supplying TrackID on which the material you wish to issue is residing

  • The Bin location, where the pallet is located, will display on the screen (Example: BULK-SA-1)

  • Enter the Qty you want to issue to the job

  • The Reason/Notation field can be left blank as this is only applicable/used with the DATASCOPE PREMIUM WMS (Reasons can be configured for manual issues. If this is configured it will post to the Notation field on the job in SYSPRO)

  • Select Post

  • The software will issue the stock code and/or lot number to the job you have scanned in both DATASCOPE WMS and SYSPRO and the supplying pallet will be reduced by the same Qty