Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

None

DATASCOPE WMS makes use of Crystal Reports for all key labels and reports.

If you don’t like reading, you can watch the video.

None

Try it!

When doing a clean install all the latest report templates (.rpt files) will be installed and available to use or customize.

To view these templates

DATASCOPE PREMIUM WMS

  • Open the File Explorer on the server where DATASCOPE PREMIUM WMS is installed.

  • Browse to C:/ Program Files (x86) / DATASCOPE / DATASCOPE WMS WebAPI / RPT

  • The latest .rpt templates will be located in this folder.

image-20240604-125057.png

FASTTRACK WMS

  • Open the File Explorer on the server where FASTTRACK WMS is installed.

  • Browse to C:/ FastTrack / Reports

  • The latest .rpt templates will be located in this folder.

image-20240604-125228.png

To configure these templates

All .rpt template are configured in the System Settings.

  • From the Ribbon Bar, browse Settings / System Settings

  • Locate the applicable System Name and update the required setting.

.rpt templates are configured per software module and therefore the System name and Setting name can differ from module to module. For more information, refer to each individual module user guide for more information on which .rpt template to configure.

  • No labels