Reference - Working in Progress / WIP Release / Job Release WIP003
By now you should have gone through the following process:
If you don’t like reading, you can watch the video.
Try it!
Once ready, you can print the Job pick slip:
Select the Confirm button in the bottom right corner of the screen
A printer pop-up will appear, asking you to which printer you want to print to
Note: When printing to a physical printer, you must ensure that the System Settings are configured correctly. In this case, the physical printer must also print in a letter format.
The JOB_PICKING setting under Settings / Printers on the Ribbon Bar must point to the physical printer. For more information, refer to Configure Printers
Once you have selected the printer a second pop-up will appear giving you the Pick Slip number
A second pop-up will appear asking you whether you want to pre-print Picking TrackID labels
Note: These labels are not used in the FASTTRACK WMS implementation, so you must select No.
Want more?
<previous Link>
<next link>