Scanner and Mobile Devices

Owned by DATASCOPE WMS
Last updated: Mar 19, 2024
1 min read

Link to the DSP Portal - https://datascopedsp.com/resources/hardware-specs/ (request login details from Admin)

DATASCOPE WMS scanner applications are all designed in HTML5 and run on Android version 8 or later. Therefore, the software can run on any Android mobile device (i.e., scanner or tablet). The software, however, is tested on a range of specific scanners and barcode label printers, and therefore, we recommend the following scanners:

  1. DATALOGIC Scorpio X5

  2. Honeywell CK65

  3. Zebra MC series (running Android)

  4. Chainway C61

Any Keyboard wedge type scanner will work with DATASCOPE WMS provided it can Auto Tab.

If you don’t like reading, you can watch the video.

None

Document

Try it!

MINIMUM REQUIREMENTS (HTML5/ANDROID)

The following are the minimum hardware requirements for the DATASCOPE WMS HTML 5 Interface. This interface can be used on a PC within a compatible browser or on an Android-based device.

Browser Support

  • PC Chrome Browser: Version 87.0.4280.88 or higher

  • Mobile Chrome Browser: Version 87.0.4240.180 or higher

Mobile Device Minimum Requirements

Android Operating System

Android 8.0 (Oreo) or higher

Display (Screen Resolution)

480px (Width) X 800px (Height) or higher

Processor

2.2 GHz Qualcomm® 64=bit Octa-Core or higher

Memory

2GB DDR4 RAM or higher

Storage

32GB Flash or higher

Connectivity

WiFi 802.11a/b/g/n/ac
Bluetooth 5.0 (Depending on Peripheral devices like wedge scanners)

For more information on setting up and configuring the scanners, refer to https://datascopewms.atlassian.net/wiki/spaces/UG/pages/60227585