Quality Test [QUC020]

The Quality Control (QC) module is a DATASCOPE WMS module that Food, Chemical, and Pharmaceutical Distribution Centers typically use. All stock codes set as “Inspection Required” in SYSPRO can be controlled in this module during the Purchase Receipt and Job Receipt stages. Each stock code can be flagged with multiple quality tests. Expected results are entered, and tests pass or fail against these criteria.

Quality test results will be created when inspectable Stock Codes are received via the Receipt Purchase Order or Job Receipt modules and tests are correctly set up. The Quality Test module will check if there are any tests for those Stock Codes and create a Test Result record that has a unique Test Result Number. A Test Result sheet will also be printed to complete the test.

To start using the Quality Control module, you should already have done the following:

Have a licensed version of the Quality Control module.
All tests should be set up and configured.

Stock Codes marked as Inspectable within SYSPRO.

Quality Tests

Quality test results will be created when inspectable Stock Codes are received via the Receipt Purchase Order or Job Receipt modules and tests have been set up correctly. The Quality Test module will check if there are any tests for those Stock Codes and create a Test Result record that has a unique Test Result Number. A Test Result sheet will also be printed to complete the test.

For more information, refer to the Receipt Purchase Order.

For more information, refer to the Job Receipt.

Enter the results of the samples tests.

If a Test Result record has been created, the user must complete the test as per test steps configured, and the results of each of the samples must be entered into the Quality Test screen. Conformance tests being True or False, and entering the value for the Tolerance test.

As DATASCOPE WMS automatically generates a Test Result number in the background, you can use the browser button from the Test Result Number field to search for the TrackID. Click on the lookup icon to locate the TrackID.

If you selected the lookup icon, the Product Inspection Lookup screen will open, and you can search for the applicable Purchase Order.

Note: You can search on the Purchase Order number, Job number, GRN number or Stock code or Lot number.

The Test Result Number is visible in the TestResult column, and the Purchase Order number in the SourceNumber column.
The option also exists to filter on the result sets where tests have already been completed. Select the Include Completed Tests tick box.
Select the applicable Test Result Number and click on the Select button in the bottom right-hand corner.
Once the Test Result Number has been added to the Quality Test screen, you can select TAB of the field to load the data grid.
The Source Type, Source Number, and Stock Code with Descriptions will load automatically.
The tests linked with the specific stock code will also display within the data grid.
This screen must be used to input the test results.
The Attachments, within the Attachments column, can be opened to find more instructions for the applicable test.
Conformance tests require the check box to be selected where the value is True (and unselected when False), and Tolerance tests require values to be inputted into the grid.

Notice that at the top of the screen, a list of all the Categories for the applicable tests is visible. The user can select the Category to work with, and the test linked to the chosen category will be displayed in the data grid. By default, all Categories are chosen; therefore, all tests will be displayed in the data grid. The Categories will remain in red text until all tests have been completed.

If tests have passed, then the Categories will turn green.

Once all the Sample results have been entered, select Post.
A validation will be performed on the entire test set, and either Pass or Fail will be displayed. The Test Categories that have been posted turn green.
The overall results of the test will be displayed. If your tests have failed, you will be notified.

If any tests were marked as Log and Fail when the tests were set in the Quality Test Setup screens, and the sample test fails, the entire test will fail.
If the tests were only marked as Log, it will pass when the tests pass or fail.

Note: There is currently no front-end screen to view the logs, but printable Reports can be created to extract data from these tables for reference.

When you select OK on the Failed notification, a Test Result sheet will automatically print out with the results.

If the system passes TrackIDs that were received, it will be marked as ACTIVE within DATASCOPE WMS. However, if they fail, it will be marked as ONHOLD, or manual action later.

SPECIAL FEATURES

The Quality Control Test Result sheet is a Crystal Report document that can easily be modified to suit your needs. For more information, refer to Customizing Crystal Reports User Guide.
If the system passes TrackIDs that were received, it will be marked as ACTIVE within DATASCOPE WMS. However, if they fail, it will be marked as ONHOLD, or manual action later.

TECHNICAL

A printer pop-up will ask where you want to print the Quality Control Test Result sheet. To print to a physical printer, you must ensure the System Settings are configured correctly. When printing to a physical printer, you must update the Printer Settings. The QUALITYCONTROL setting under Settings / Printers on the Ribbon Bar must point to the physical printer. For more information, refer to Configure Printers.
On the Ribbon bar, go to Settings / System Settings. Search for the QUALITY_CONTROL System Name in the drop-down. Update the following SettingNames. PRINT_TO_PDF_PATH = SettingValue can be left blank, QC_FINAL_RESULT_REPORT = SettingValue must be QCFinalResultSheet.rpt, QC_TEST_SHEET = SettingValue must be WMS_A4_QCTestSheet.rpt. Select Apply in the bottom right-hand corner to save your changes.

SYSPRO REQUIREMENTS & Business objects used

None

REFERENCE

QUC020