Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Quality Control / Quality Test [QUC020]

The Quality Control (QC) module is a DATASCOPE WMS module that Food, Chemical, and Pharmaceutical Distribution Centers typically use. All stock codes set as “Inspection Required” in SYSPRO can be controlled in this module, both during a Purchase Receipt and Job Receipt stages. Each stock code can be flagged with multiple quality tests. Expected results are entered, and tests pass or fail against these criteria.

This User Guide will focus on how to use the Quality Control module out of the box.

Quality test results will be created when inspectable Stock Codes are received via the Receipt Purchase Order or Job Receipt modules and tests have been set up correctly. The Quality Test module will check if there are any tests for those Stock Codes and create a Test Result record that has a unique Test Result Number. A Test Result sheet will also be printed to complete the test.

Info

If you don’t like reading, you can watch the video.

Panel
panelIconId1f3a5
panelIcon:movie_camera:
panelIconText🎥
bgColor#DEEBFF

None

003_premium_QUALITY_CONTROL_OUT_OF_THE_BOX_product_userguide_UG - v0.1.pdf (draft form)

Try it!

Prerequisites

To start using the Quality Control module, you should already have done the following:

  • Have a licensed version of the Quality Control module.

  • All tests should be set up and configured.

  • Stock Codes marked as Inspectable within SYSPRO.

Without the above in place, you cannot use the Quality Module successfully. For more information on activation and configuration, refer to Activate the Quality Control Module

Quality Tests

Quality tests resulttest results will be created when inspectable Stock Codes are received via the Receipt Purchase Order or Job Receipt modules and tests have been setup set up correctly. The Quality Test module will check if there are any tests for those Stock Codes and create a Test Result record that has a unique Test Result Number. A Test Result sheet will also be printed to complete the test.

Receipt Purchase Order

Info
Follow the steps to do a Receipt Purchase Order

Note: Ensure the Stock code is marked as Inspectable in SYSPRO.

For more information, refer to the Receipt Purchase Order User Guide.The QC Module .

  • From the Main Menu, browse to Inbound Receipt / Purchase Order Receipt / Receipt Purchase Order.

  • Enter a Purchase Order number in the Purchase Order field.

  • Enter the Received items and allocate them to the required pallets.

  • Once completed, select Finalise.

  • A Printer pop-up will appear to print the TrackID labels.

  • Quality Control module will check whether tests are created for the specific stock codes, and a Test Result record will be created, which will be visible on the Quality Test screen.

  • Once completed, a second Printer pop-up will appear.

Image Added
Info

Note: A printer pop-up will ask where you want to print the Quality Control Test Result sheet. To print to a physical printer, you must ensure the System Settings are configured correctly. When printing to a physical printer, you must update the Printer Settings.  The QUALITYCONTROL setting under Settings / Printers on the Ribbon Bar must point to the physical printer. For more information, refer to Configure Printers.

  • A Quality Control Test Result sheet will automatically print for the TrackIDs just received.

Image Added
Info

Note: The Quality Control Test Result sheet is a Crystal Report document that can easily be modified to suit your needs.

Image Removed

For more information, refer to Customizing Crystal Reports User Guide.

Image Added
  • The Test Result Number will be displayed on the Quality Control Test Results Sheet

will be printed
  • .

  • The next step will be to perform the quality test on the newly received TrackIDs. This is done on the Quality Test screen.

Job Receipt

Follow the steps to do a Job Receipt.

For more information, refer to the Job Receipt User Guide.

The QC Quality Control Module will check whether there tests are tests created for the specific stock codes and , a Test Result record will be created, and a Quality Control Test Result sheet will be printed.

Enter the results of the samples tests.

If a Test Result record has been created, the user must complete the test as per test steps configured, and the results of each of the samples must be entered into the Quality Test screen. Conformance tests being True or False, and entering the value for the Tolerance test.

  • From the Main Menu, browse to Quality Control / Quality Test

  • The Quality Test screen will open.

  • Enter the As DATASCOPE WMS automatically generates a Test Result Numbernumber in the background, you can use the browser button from the Test Result Number field or click to search for the TrackID. Click on the lookup icon to locate the Purchase OrderTrackID.

  • If you selected the lookup icon, the Product Inspection Lookup screen will open, and you can search for the applicable Purchase Order.

Info

Note: You can search on the Purchase Order number, Job number, GRN number or Stock code or Lot number.

Image Added
  • The Test Result Number is visible in the TestResult column, and the Purchase Order number in the SourceNumber column.

  • The option also exists to filter on the result sets where tests have already been completed. Select the Include Completed Tests tick box.

  • Select the applicable Test Result Number and click on the Select button in the bottom right-hand corner.

  • Once the Test Result Number has been added to the Quality Test screen, you can select TAB of the Refresh icon field to load the data grid.

  • The Source Type, Source Number, and Stock Code with Descriptions will load automatically.

  • The tests linked with the specific stock code will also display within the data grid.

Image Removed
  • Image Added
  • This screen must be used to input the test results.

  • The Attachments, within the Attachments column, can be opened to find more instructions for the applicable test.

  • Conformance tests require the check box to be selected where the value is True (and unselected when False), and Tolerance tests require values to be inputted into the grid.

Image Added
  • Notice that at the top of the screen, a list of all the Categories for the applicable tests is visible. The user can select the Category to work with, and the test linked to the chosen category will be displayed in the data grid. By default, all Categories are chosen; therefore, all tests will be displayed in the data grid. The Categories will remain in red text until all tests have been completed.

Image Added
  • If tests have passed, then the Categories will turn green.

Image Added
  • Once all the Sample results have been entered, you can select Postselect Post.

  • A validation will be performed on the entire test set, and either Pass or Fail will be displayed. The Test Categories that have been posted turn green.

  • The overall results of the test will displaywill be displayed. If your tests have failed, you will be notified.

Image RemovedImage Added
  • If any of the tests were marked as Log and Fail, when the tests were setup set in the Quality Test Setup screens, and the sample test fails, the entire test will fail.

  • If the tests were only marked as Log, it will pass when the tests pass or fail it will pass.

Info

Note: There is currently no front-end screen to view the logs, but printable Reports can be created to extract data from these tables for reference.

  • When you select OK on the Failed notification, a Test Result sheet will automatically print out with the results.

Info

Note: A printer pop-up will ask where you want to print the Quality Control Test Result sheet. To print to a physical printer, you must ensure the System Settings are configured correctly. When printing to a physical printer, you must update the Printer Settings.  The QUALITYCONTROL setting under Settings / Printers on the Ribbon Bar must point to the physical printer. For more information, refer to Configure Printers.

Image Added
Info

Note: The Quality Control Test Result sheet is a Crystal Report document that can easily be modified to suit your needs. For more information, refer to Customizing Crystal Reports User Guide.

  • If the system passes TrackIDs that were received, it will be marked as ACTIVE within DATASCOPE WMS. However, however, if they fail, it will be marked as ONHOLD, or manual action later.