HTML / Stock Take by Bin [STK057]
During this step, users will physically start counting the stock on the warehouse floor for the selected Bin range using the mobile scanner. The HTML5 Stock Take By Bin module will be used.
If you don’t like reading, you can watch the video.
<link to YouTube video>
<link to PDF doc on my OneDrive>
Try it!
To launch the HTML 5 scanner-based screen from the PC; Select the Launch HTML 5 menu on the Ribbon bar.
The sub-menu will open. Select Launch HTML 5 again.
Use the Search icon to locate the Stock Take By Bin Module.
The Stock Take By Bin module window will open.
Start by selecting the warehouse (it must be the same one you have selected in both SYSPRO and DATASCOPE PREMIUM WMS) you are counting.
Next, the user will scan (or type)) the first bin location in the Bin field.
Scan the TrackID within the Bin location. The software will then automatically load the first stock code that is theoretically living on the scanned TrackID.
The Description will load.
Next, the user must capture the actual quantities of stock within the TrackID.
<next>
Select Post.
If you refresh the PC-based Stock Take By Bin screen under Stock Take and Cycle Counting / Stock Taking. You will notice that the scanned items will be populated on the right-hand side of the screen. Each scanned item on the right-hand side will be next to the original line on the left-hand side.
<image>
Notice that the Bin Count % and TrackID Count % progress bars will increase as users physically count the stock in the selected bin range.
The above process must be done for all the selected bins in the bin ranges selected in SYSPRO.