Start DATASCOPE PREMIUM WMS stock take by bin
- DATASCOPE WMS
Stock Take and Cycle Counting / Stock Taking / Stock Take By Bin [STK002]
After taking a snapshot of the current quantities for the selected Bin range within SYSPRO, you can populate the DATASCOPE PREMIUM WMS Stock Take data grid.
This is required to start physically counting inventory on the warehouse floor.
If you don’t like reading, you can watch the video.
Try it!
On the Main Menu, browse to Stock Take and Cycle Counting / Stock Taking / Stock Take by Bin
The Stock Take by Bin screen will open. It looks very similar to the Stock Take screen.
Select the same Warehouse you have selected in SYSPRO when setting up the Bin range.
Select the Start WMS Stock Take button.
The Information note next to the Warehouse will change to “Stock Take Started Successfully.”
Select the identical bin range selected in SYSPRO, as per the red warning message on the window.
Select the Refresh icon to load the data grid.
The data grid will display all DATASCOPE WMS theoretical TrackID QTYs in each bin location.
Next, the users on the floor will start counting and capturing each Bin and each TrackID logically and sequentially with the scanners, using the Stock Take by Bin HTML5 screen.