Picking a Job pick slip assigned to you

Owned by DATASCOPE WMS, created
Last updated: Nov 14, 2023
4 min read

HTML / Job Pick to TrackID [PIK063]

For more information on the Job picking process and creating or releasing Job pick slips refer to the Job Picking process and release

You’ll need to understand the Pick slip review screen to start transacting Job pick slips. This screen gives the user a great overview of all picking slips in various statuses. The screen is used extensively in the warehouse to monitor progress. For more information, refer to Pick Slip Review Overview

At this stage, pick slips must have been assigned to an operator.

If you don’t like reading, you can watch the video.

Fast Track - Job Picking

fasttrack_JOB_PICKING_Training_Job_picking_QG - v0.3.pdf

Try it!

Once pick slips are assigned, the user can start picking the pick slip:

  • Ensure the Job Pick to Pick Slip HTML 5 scanner-based screen is open

  • The Slips Tab shows all the pick slips already assigned to the logged-in user

Job pick to pick slip screen - Slips TAB

  • The user will click on a pick slip and select Next to start picking. The scanner will automatically move to the Items TAB. This is where all the line items for that pick slip are visible.

Job pick to pick slip screen - Items TAB

  • If the user is following the Bin Number sequence indicated by the system, then they can just select Next. This will move to the next TAB, which is the Pick TAB.

  • The required stock code, Qty and reserved TrackID, and bin location are displayed at the top of the Pick TAB screen. The reserved Lot (if the item is Lot traceable) and the stock code description will display in the blue bar under the Sugg TrackID.

  • The user must then physically go to the suggested bin location and find the suggested TrackID. This must be scanned in the TrackID field. The rest of the screen will then autoload with the relevant information. For example, the available Qty of stock on that TrackID will show for information purposes.

  • Next the user must enter the Qty being picked and click Post

  • If the suggested TrackID is not available, the user can click the Lookup Stock button to reveal where else in the warehouse this stock code resides to pick off a different TrackID.

  • After picking is completed, select Post, and the scanner will direct the user to the remainder of the stock codes to be picked.

  • Lastly, once all stock codes have been picked, the Confirm TAB will display. Over/under-picked items outside of the picking tolerance will appear in red, over/under-picked items within tolerance will appear in yellow and exactly satisfied items will appear in green

  • Select Confirm to complete the pick. The Confirm process issues the picked material to the job in SYSPRO.