Shipping Dims and Mass [SHP100]

Owned by DATASCOPE WMS, created
Last updated: Nov 10, 2023
1 min read

Dimensions and mass are typically updated just before the pallets can be dispatched. This will happen while a pallet is physically being weighed and measured.

A user would enter this information per Shipping TrackID either on the PC screen or the HTML5 scanner.

At this stage, the transactions have yet to be posted to SYSPRO, and you will still be able to unpick or unpack stock. For more information on palletizing stock, refer to Shipping Palletization

Note: The Shipping TrackID must be in a status of IN_PACKING, and all pick slips must have been added to a Shipping TrackID before final dimensions and mass are added.

  • Scan (or enter) the first Shipping TrackID.

  • Enter the Dimensions and Mass for the first Shipping TrackID.

  • Select Post

  • You’ll go ahead with all Shipping TrackIDs for that specific Waybill in the same manner.

  • If you refresh the Shipping TrackID tab on the Waybill/BOL Maintenance PC screen, you will notice that the Shipping Status has changed from IN_PACKING to ASSOCIATED, and the dimensions and mass will be updated.

Note: The difference between the ASSOCIATED and PACKED status is whether dimensions and mass have been done on the scanner or the PC screen. When done on the Scanner the status change to ASSOCIATED and when done on the PC it changes to PACKED.

  • Select Exit to close the screen

The next step will be to truckload the finalized Shipping TrackIDs into the delivery vehicle when the shipping agent arrives - Truckload

SPECIAL FEATURES

  • None

TECHNICAL

  • None

SYSPRO REQUIREMENTS & Business objects used

  • None

REFERENCE

SHP100 (HTML)

 

 

 

Â